Clemens lathe
 

I was wondering if anyone could tell me where the best place to buy the Dale Clemens rod wrapping lathe would be
Thanks, Derek.

RE:Clemens lathe
 

It's not completed on the site but you can purchase it from Clemens Tackle <a href="http://www.clemenstackle.com/" target="_blank"><!--auto-->http://www.clemenstackle.com/</a><!--auto-->

RE:Clemens lathe
 

Thanks John, do you know the price. I just purchased a flex coat power wrapper and it is a piece of s#it.It is of terrible qualit, i'm sending it back. I've been tld that the clemens is around 450-500 dollars, but I'm not sure. Thanks, Derek.

RE:Clemens lathe
 

Striperman, the only place you can buy a Clemens Rod Wrapper is from Clemens direct. If your looking to do surf stuff in the 9', 10' an 11' range then you can expect to pay about $725 for a complete setup. Here is what you need: The Basic Unit which has the motor with pulleys, one rod support and a 4' bed section. You need to buy (2) additional 4' beds, (2) additional rod supports and the 4 or 8 thread carriage. I have the 8 thread carriage and don't really think you need it. I've had mine for 5 years now and can tell you it's all you'll ever need.