Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   Boat Fishing & Boating (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=24)
-   -   Pulling the boat-engine problem (http://www.striped-bass.com/Stripertalk/showthread.php?t=34642)

Van 09-16-2006 09:36 PM

Pulling the boat-engine problem
 
Went out today for quite a while. Went all the way to the NW corner.
I noticed some noise from the OB on the way out but not too bad.
Trolled for a while then when i started back home, I could hear what I describe as knocking. It went away if I kept her under 3500 rpm.
Also noted the temp gage pegged, but the engine was not overheating. The alarm never wnet off.
When I got back to the slip. I lifted the cover and saw water in the pan. There is a hose split towards the back of the powerhead.

So maybe the water shorted the temp sensor wires. That could explain the gage, but what was the knocking sound? And she ran pretty rough at higher rpms. I will check the plugs and change the filter tomorrow (on land). Run it on the hose and see. Hope its not serious. There is still plenty of fishing season left.

Any thoughts are welcome

BigFish 09-16-2006 10:46 PM

I think waders are in order!:hidin:

MrHunters 09-17-2006 06:07 AM

knocking is never a comforting sound.
not the same but.
I have a bunch of knocking somewhere in the motor... kind of sounds like a diesel between 500-700 rpms. cleans right out as soon as i give it a little throttle. So I'm thinking my knocking is either a) because im still breaking her in or b)some sort of vibration in the motor. Still going to get it checked out regardless.

Could the knocking sound be a rattle caused by engine vibration? Hope you could follow all those technical terms, and clearly i am a professional... so TIFWIW :)

ProfessorM 09-17-2006 11:22 AM

Boats are definately a love hate relationship for sure. P.

thefishingfreak 09-17-2006 08:20 PM

good luck with it.
I blew a water pisser hose on one of my 250's . didn't notice it for a long time.
fixed the problem but the weeks of salt spray on the motor ruined a few of the wiring harness connections..
a couple injectors failed due to bad wires......----> ka-BOOM..:wall:
douse it with wd-40 or you favorite flavor, is all i can say.

Van 09-17-2006 08:50 PM

Worked on her today. Mostly it was pretty dry inside only a little corrosion.
The pinned temp gage is a bad sensor. Easy fix, maybe it got wet. Its actually working now, so i'll just keep an eye on it.

Fixed the hose plus did a couple more for good measure.

Changed the plugs (they did not look too bad), then the fuel filter.
I dumped it out into a bucket and did notice some crud and discolortion. So thats about all i can do, I'll put her back in Tues or Wed and see how it runs. If NG then off to the shop and thats prolly the end of this seson for me.

I may have to become a ...........




dare I say it..............





shameless boat whore !!!!!

NNNOOOOOOOOOOOOOOOOOOOO:uhoh: :uhoh:

thefishingfreak 09-17-2006 08:52 PM

:devil2:

Fisherwoman 09-17-2006 08:55 PM

Van Sorry to hear that, too bad we did not come in at the same time to give you some back up , but you kinow you always have a nice 27 ft to back you up any time buddy!!!:buds:

Van 09-17-2006 08:57 PM

Quote:

Originally Posted by Fisherwoman
Van Sorry to hear that, too bad we did not come in at the same time to give you some back up , but you kinow you always have a nice 27 ft to back you up any time buddy!!!:buds:

You may be getting a call real soon !!!!!:kewl:

Fisherwoman 09-18-2006 08:57 AM

Any time buddy you know we got your back.


All times are GMT -5. The time now is 10:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com