Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   StriperTalk! (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=12)
-   -   Can you tell me about this Lami? (http://www.striped-bass.com/Stripertalk/showthread.php?t=36292)

reebok 11-26-2006 04:32 PM

Can you tell me about this Lami?
 
I dug out a few lamiglas rods that were handed down and wonder what these are good for. The model is SB 136 3M. One is cut down at the tip about 6 or 8 inches. Does anyone know anything about these?

Thanks.

Oh, E-Glass, good for pencil popping.

mikecc 11-26-2006 04:49 PM

SB1363M is a Honey colored fiberglass blank not E Glass.
E Glass would be SSB1363M.
Good rod I used one for a long time throwing 3-5 oz

gadabout 11-27-2006 09:51 PM

They are great blanks. I use an SSB 1363M full-length as my main outfit for heavy plugging. The honey-colored blanks (SB) are E-glass and the dark brown blanks (SSB) are S-glass. (Sorry Mike.) S-glass is a little stiffer than E-glass.

reebok 11-27-2006 10:12 PM

Thanks guys. I appreciate the information.

Mike P 11-28-2006 08:53 AM

A full length 136 3M can throw just about anything, from a Bomber to 6 oz and bait. Not ideally (3-5 is the sweet spot), but it will do the job better than just about anything else.

It's the rod I had when I could only afford one ;)

Swimmer 11-28-2006 12:02 PM

I made the honey colored blank into a rod about twenty years ago. I snipped 3" off the top and put a larger tip on it. I could toss lures a country mile with that rod. Snapped it in half after beating on it casting for 5 or 6 years as I recall.


All times are GMT -5. The time now is 09:28 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com