![]() |
proper way to use a Van Staal
Here is a video of a Van Staal rep showing the proper way to use the manual pickup. Note that he say's, "move the line roller to the 8 o'clock position."
Well, maybe I'm a "nit picker" but that roller is not at 8 o'clock. Viewing from butt to tip, that would be the 10 o'clock, or from tip to butt would be the 2 o'clock. The only way to make that 8 o'clock would be if you held the reel as a conventional (top of the rod). Oh well, he got everything else right. :splat: :cputin: http://www.youtube.com/watch?v=RhyuTVvT1Kc |
its also on the salwater edge website
|
Very cool use of a free source.
How long till there's some shots of the moon on there..:D On the manual bail I learned a neat trick I cannot wait to try next season..When fishing a needle fish to keep tension on the line so to prevent wind knots.Stick ur pointer finger out an just let the line tick ur fingernail as it winds onto the spool.I was told it just puts enough tension on the line to wrap it tight enough to prevent the blow-ups. Seems like it might work anyone else do this.. |
From the position he's looking from, with the reel foot at 6:00, the roller does look to be at 8:00.
|
Quote:
|
Quote:
great, now I need to get a manicure to fish with NIB because he'll be looking @ my fingernails:uhoh: |
|
Looks like Rob got the better rock..
|
Quote:
To some degree it's the only rock. The one next to him is deceptively hard to stay up on... |
Quote:
|
Pardon my ignorance but the trouble I have always had was that post cast the line is not always reachable by the top hand. If what I understand he is saying is that post cast if your hand is gripping the stem you should always be able to bring the line (smoothly) in with your finger so that it is picked up by the bail. Correct?
|
I you don't know how to use one, or can't figure it out on your own, you shouldn't be buying one in the first place :rollem:
It ain't exactly rocket science :wall: |
Quote:
|
Know what I wish someone would make a "how to video" for? Those damn snoopy rods....gosh I just cant figure out that push button reel......
|
Quote:
|
Wasn't directed at you personally.
Just an observation that before anyone spends close to 7 portraits of Franklin on equipment, they should have an idea of how to use it, and not have to watch a video, that's all. |
I think if you said "Pardon my bloody ignorance" Mike P would of let that slide. :jester:
have a pint :cheers: and don't be so sensitive. |
No offense taken. All jibes taken in the spirit they were given - good fun.
|
i know that rock.. I think. somewhere in gansett?
|
Think low tide, ALL the way out, off a "rockpile" in Newport.
Next stop Block Island... |
It’s a simple thing – really. Handle down spool out. In Greg’s video his handle is up a little too high for my liking. When the handle is all they down the spool is all the way out, and you have less of a chance of your handle turning all the way around a few times and having your roller catch the line. Hand placement does not matter, as long as your index finger is about even with the spool. It should not be too high or too low. I have small hands and put four fingers above the stem when casting. I would not worry about where the roller is. When placing it from the spool to roller keep the line between the roller and spool tight and you will have no problems. Handle down spool out is also true for the 706z. If your handle is down, but your spool is in, try putting a couple of washes in the handle, until you have handle down spool out. It is very important, especially in a crosswind. NIB—YEP the “ finger trick” will save you much hard ache.
|
Quote:
|
I guess I'd have to say I'm a little surprised by some of the responses.
A very common request I get via email is to NOT assume that our customers know everything and to not ignore basics when it comes to how to videos and articles. This video, and many of the others, are in response to that. Hopefully there won't be a issue with "how to tie a leader" because there's going to be one and more. I get that request several times a day during the summer. People want to know. Same for how to use a manual bail. Constant stream of requests. I guess being in a shop every day I'm just more aware of it. We all started as newbie anglers at some point... |
[QUOTE=Pete_G;484964]I guess I'd have to say I'm a little surprised by some of the responses.
QUOTE] Pete, looking at it from a different point of view I feel a little bad about my comment and apologize if I offended anyone. Lord knows I have asked my share of questions. However, I admit I couldnt believe this would need explaining! I was thinking that chances are pretty good if someone is buying a VS they are not newbies!!! |
It came as a combined birthday/xmas gift without input from me. At the end of the day I probably would of been happy with two new 705z if they were around. But as you can guess the mechanics were not working well and I went back to the 705z. When I get back to the states i will try it out again with the new info.
|
I thought about using a 706 to avoid controversy (since I know this is the only real thing causing the issue :laugha: ... ), but, I can't get them anymore.
In a bailed world bailless reels are a mystery to most anglers; young or old, new or veteran. Daily requests in the shop of "how do I use a bailless reel" are proof of that. I'll be continuing to add videos for the things anglers are nervous to ask about online. Obviously you could get pounced on for being foolish enough to ask such a thing in a forum, so SWE YouTube will pick up where forums leave off... |
Quote:
|
I think the video is a great addition. I don't understand how anyone could take any offense to it.
Wait, did someone mention Van Staal?...:chatter :chatter :smash: :lossinit: :bsod: Here is another video of someone using a manual Van Staal.... Another method.. http://www.youtube.com/watch?v=uYVlaKutiqM |
Quote:
|
Quote:
|
All times are GMT -5. The time now is 01:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com