How is the-
 

rear hook on a tuna cedar plug rigged?

OK, i found the 6oz is rigged with a #10 hook and strung through with #130 mono.

Anybody know if it is epoxied in. :huh:

:fishslap: buy one off ebay and smash it with a hammer ... My Big Daves ... Similar I use wire thru the hook and crimp a sleeve on .. run wire thru the plug and out nose 10" and crimp a sleeve on making a loop .. Secure hook in arse with molten lead..Hi Dave ..

Thanks Eddie, appreciate it. :btu:

Wanted to make up a batch for my son in law and didn't have a clue
as to how they were rigged. :doh:

the plug is hollow with a hole strait thru.
the hook is a Needle Eye hook, crimped on, that just floats arround in the hollow plug, the crimp rests up against the lead-head and sets the hook position.
the lead is cone shaped with a relief in the back then epoxied in the wood with a gromet up front and a big gromet in the rear. :tooth:

Kewl Mike, Thank You. :D