First time
 

Iv'e been lurking on this forum for a long time now but this is my first post with my plugs. Still learning, got a long way to go... Well here are my latest plugs.

Top one is around 4,7in and 1,4 ounce.
Bottom one around 3,9in and 1,1 ounce.
http://www.moj-album.com/slike/78718...rAsrR0ko.v.jpg


5.1in and 1.2 ounces
http://www.moj-album.com/slike/78718...v2PvVvgd.v.jpg


Around 4,7in and 1,5 ounces (no epoxy, just white color and glass powder used for drawing lines and signs on roads).
http://www.moj-album.com/slike/78718...cnO9SPiI.v.jpg

Around 6,7in and 2,3 ounces.
http://www.moj-album.com/slike/78718...9FC4YKMv.v.jpg

7in and 2.3 ounces
http://www.moj-album.com/slike/78718...y_ZYfeM9.v.jpg



7in and 2.1 ounces
http://www.moj-album.com/slike/78718...7ENzmZn_.v.jpg


1.9in and 0.35 ounces
http://www.moj-album.com/slike/78718...CRMU3UsY.v.jpg

http://www.moj-album.com/slike/78718...3YA4nuik.v.jpg

http://www.moj-album.com/slike/78718...PgSaAeUO.v.jpg

And a couple of squid catching plugs
http://www.moj-album.com/slike/78718...0HEo3DwC.v.jpg

http://www.moj-album.com/slike/78718...EpCZUiJ9.v.jpg

Hope you like them, any advice or criticism is very welcomed.

Zoran

great job!
Much better than my 1st handcarves :realmad:

Nick

wow
 

man they all look good, love the little poppers........with the medal lip plugs, most that are built the nose loop gos sideways not up and down. I don't know why...did you find the action better up and down...just wondering thanks..they look great

Thanks guys! Stripercrazy these are my first plugs with lips so I went with vertical nose loop. I think they swim great so I left them as they were. My next batch is geting sideways nose loops and we'll see if it'll make any diference.
Montauksrfcastr all are done with lathe, except for the flat sided swimer, which is a handcarve.

Zoran

Really cool stuff. The squid jigs are the nutz. Love the old style Pfluger color scheme (blue over silver over yellow), too. Welcome, and thanks for showing them.

look very nice