Knot for mono to braid for tuna
 

I have a question for people that have successfully caught BFT on spinning gear. I've been tuna fishing on the Cape for the past two seasons. I use spinning rods to cast at tuna and I run 50lb. braid to a 60lb or 80lb fluorocarbon leader. I've had trouble finding a good knot so I've been using a barrel swivel but this make casting extremely difficult when your using a 6 foot plus long leader. I need a knot that is strong enough to withstand the pressure of fighting a bft and will also pass through the guides. I tried using the slim beauty knot but this knot weakens and breaks after being repetitively cast through the guides. My friend tried using a Mid knot but this knot got destroyed by the guides as well. (I'm not sure if he tied the mid knot correctly though)? I've tried using a uni to uni and an Albright but I don't feel these knots hold well with a thin braid to a thick mono. Anyone try the Alberto knot? One charter captain said he uses a triple surgeons knot but I just can't imagine this knot having a high break strength? Any suggestions would be great.
Thank You

Best knot for this is the slim beauty. Google it. Easy to tie and goes through guides great.

If you have hollow core braid put a loop in the end and buy a wind-on leader

I started using the pr knot, its slick. Look for it on youtube. You need a bobbin. It gets 100% strength if tied right.

When I caught my tuna on spinning gear last year, I used 80lb pp braid tied with a triple surgeons knot to a 12' leader of 80lb ande pink.

I now use this knot on all my rods.

I tried the slim beauty last year and it failed on me. It seemed like it gets weakend after a lot of cast by passing through the guides.

albright

The alberto knot is just a slightly modified Albright knot. Best bet is to use Jerry Brown hollow core braid and put a loop in the end and then use a loop to loop connection to the mono.

I dont believe you can chinese finger 50 lb braid. I dont think it is hollow. Could be wrong.

We use the slim beauty for tuna also. For stripers and small stuff a double surgeon knot has never failed and you can tie it in the dark.

I've heard the slim beauty is a very good knot, but I've not used it. Although I just dropped a 150 lb+ tuna it was not due to the knot.

I, at Eric Stewart's (The Hook Up) recommendation have used a double albright and the knot has never failed on me. Rather than making just one set of wraps (from the tag end back toward the running line), make 6 or 7 wraps from the running line out toward the tag, then make the same number of wraps back the other way, feed the line through the loop formed in the leader, wet, and pull tight.

O.K. I'll say it again; best bet is to use Jerry Brown hollow core braid and put a loop in the end and then use a loop to loop connection:doh:

I must have been asleep when I posted it. Forgive me.

I am not familiar with braid to mono but wouldn't a uni-knot work?

Another option is to tie two bimini twists, one on the braid and the other on the mono, or two spyder hitches and then use the loop to loop connection.

I thought about that but two biminis would proly be difficult to cast with a spining rod.

I, at Eric Stewart's (The Hook Up) recommendation have used a double albright and the knot has never failed on me. Rather than making just one set of wraps (from the tag end back toward the running line), make 6 or 7 wraps from the running line out toward the tag, then make the same number of wraps back the other way, feed the line through the loop formed in the leader, wet, and pull tight.[/QUOTE]

Is this the same as doing an Alberto knot?

i think I am going to try the sebile knot for my power pro. If I hd hollow core I would wind on, but I have 65lb PP, so sebile knot it is. I have been a fan of the slim beauty, but I have recently learned the sebile knot and it seems like a better knot to cast.

Yes

Ooooor you move up to 65lb JB and chinese finger trap the mono and serve the junction. :)

A bunch of the offshore boards have big long threads about this, easy to google.

knot and line strength
 

For what it's worth, I set up a knot/line breaking mini lab.
Power Pro consistently breaks at a little over 50% of its rated strength, Jerry Brown is in the mid 90%'s (breaks are happening in the middle of a 4' section of line being pulled between fixed point and scale, not within 6" of knots, pressure is gently increased until line breaks).
The slim beauty tested in high 90%'s, albright, double uni and surgeons all failed between 50-75%.
I like the sound of the loop in Jerry Brown. Jerry Brown has hollow core at 65#, I believe PowerPro goes to hollow core at 80#.
We switched everything over to Jerry Brown and the slim beauty with good results.

going to try slim beauty as it seems to be easy to tie and goes through the guides good, anyone using the momoi braid have any feedback on it?