Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   How To's, F.A.Q.s, Tips, & Tricks (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=33)
-   -   making a gaff (http://www.striped-bass.com/Stripertalk/showthread.php?t=5979)

Goose 02-08-2003 02:30 PM

making a gaff
 
1 Attachment(s)
Finaly got around to making a custom gaff. Its is alot easyer to spend the twenty bucks on a nice gaff but to me there's something special about having something you made. Almost like custom rods the lengths of the grips and where you want them to be placed is all up to you, just like anything else the more time you spend and the more thought out your design the better end result.

This is what you'll need to make you basic gaff:

1...1"x4' hard wood dowel
2...2' peice of poly rope
3...two part apoxy
4...9/16 U nails
5...3' cork tape
6...the hook
7...string 1/16
8...butt cap

Before cuting the dowel to the desired length, cut a gap so that your hook fits snug. I do this by starting with a jig saw..then a mider saw and a drill.

Goose 02-08-2003 02:36 PM

1 Attachment(s)
Before setting the hook in place I file the end to the desired taper and paint it black. Fill in the gap with plenty on apoxy and use a U nail to hold it snug

Goose 02-08-2003 02:43 PM

1 Attachment(s)
Then cut your dowel to the desired length. I then drill about 11/4 from the end straight through. A little bigger then the size of your rope. From the top drill a hole twice the size of your rope in the center of he dowel. I use 40# to pull my rope through. Once through I burn the ends good and tack them down with one U nail. Apoxy.

Goose 02-08-2003 02:48 PM

1 Attachment(s)
Once I sand apoxy around the hook area I then wrap it tight with rope. This type rope can be found for cheap $$ at ship supply store. you can use a snell type tie(as recently shown in the fisherman, last week) or use a the same tie-off used in rod wrapping.

Goose 02-08-2003 02:57 PM

1 Attachment(s)
paint your gaff now or if it will be wrapped there is no need. Apply your cork tape. I add 3/4" more on each end for filing and then to be sanded. At this point if you wish to paint, wrap the ends with E size thread(use the same technic as in rod wrapping)

Goose 02-08-2003 03:04 PM

I find that wrapping a dowel is easyer then wraping a rod just because the diameter is the same from end to end. You can get as crazy as you want or keep things simple"its just gaff" People tell me mine is crazy...then I guess it fits me perfect!

Drill ahole through the butt cap, pull through with mono.

Goose 02-08-2003 03:09 PM

The finishing touch will be a bass decal between the diamonds and the name on the boat in the middle of the swirl.

Goose 02-08-2003 03:21 PM

This is my first gaff so you guys that have done them and know of a better way...I'ld like ta hear it.

TheSpecialist 02-08-2003 05:02 PM

Thats excellent Tony, are you gonna epoxy the whole thing?

capesams 02-08-2003 05:52 PM

GOOSE.....better leave that ta home. it'll take a walk fa sure when your not lookin.......nice job........did that to a guys 6' boat antenna once.

tlapinski 02-09-2003 07:26 AM

real nice work! been thinking about something like that for a while, but somebody told me they were gonna make up a bunch this off season...........

i have seen some gaffs done with old rod blanks, too. anybody ever do this? i need to do up something for using over at the C'town b'way. taken too many waves gooing down after other guys fish.:smash:

capesams 02-09-2003 08:02 AM

made a 6"er for the rocks, people thought I was nuts, but I stayed dry.

tlapinski 02-09-2003 08:05 AM

CS - you use a wooden dowel or a fiberglass blank? i would need to do something in the 6' range for the b'way.

capesams 02-09-2003 08:50 AM

I used a push broom handle I had hangin around, cut the slot , wraped the head with sst 40# jig wire an coated with poxy. it gets beat up on the rocks so I didn't make it to look purty. about 9 yrs old now an still works fine.

bloocrab 02-09-2003 10:13 AM

Quote:

and know of a better way...I'ld like ta hear it.
...you could go to a raffle with a friend......and WIN ONE!!! :D:D


thanks Goose! :)

Mr. Sandman 02-09-2003 10:59 AM

Very nice? How is the weight? I want to make a jetty gaff from a heavy rod blank.

Goose 02-09-2003 11:54 AM

Thanks guys.....I haven't weighted it but it feels alittle on the heavy side for a gaff. You could also go with 7/8'' aluminum pipe which is a little lighter then a glass rod or wood.

Certain areas require an even longer gaff. Last year, after learning the hardway, I made a 18' gaff. :doh: ::) Guys who fish RI rocky shores know how turbulent and rough them waters can often be. Not only will a gaff of that length help you land BIG fish but more importantly, will not have you take unnecessary risks.

This 18' gaff (two piece telescopic) consists on two poles( 7/8"x9' and 11/2''x9'). I predrill two holes on the end held with nuts and bolts. I also build up one end with duct tape so theres less play. The hook is held with tw s/s pipe clamps. At 9' it fits in the van nice.

Most guys will never have the need for a 18' gaff but theres always those few hot spots that most guys won't even think about trying. Put your gaff together before you cast.

capesams 02-09-2003 12:31 PM

I maDE A HERRIN NET OUT OF A fiberglass extention paint roller handle, folded up it was 8' long, pull it out its 14' long, no hands an knees fa this boy.

lobsterman02649 03-02-2003 09:49 PM

Gee, that is a pretty gaff. However, for you more pragmatic fisherman (from a former commercial guy) Use a oak staff, Take the right angled 1/2" point and take a hammer and nail it into the shaft (as it was designed) and wrap it with wire or heavy line. If you need one fast for a temporary fix you can use duct tape to hold it in place. Even this temporary fix will work on a gaff to lift about 1000 -2000 lbs of cod depending on the number of duct tape wraps you make!

Good Fishing, Lobsterman

Chris in Mass 01-04-2008 10:12 PM

I think the pictures are eff'd up. Pretty funny though. Any way to fix?

bloocrab 08-08-2012 10:20 PM

???? Yeah, pictures are wrong....and a lot of edits from the "FishingFreak"...


What happened to this thread???

piemma 08-12-2012 10:16 AM

I have a 4' made out of an old tuna blank. Custom diamond wrap by Dave Hammock at Murats right before he died.


All times are GMT -5. The time now is 02:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com