FOILING
 

This if my first try at it so I went big. another 8" x 2" plug. there will be 5. pic"s showing how I did it.
1. I had sound some ROAD KILL WOOD was an old chair so I cut of the ends
2. sanded an filled in where the cross member was w/ a section of the crosss member.
3. sanded it again, sealed, an primed in black so you can see the scale. I cut it to fit, an put the cut section on TOP.
4.Foil I used regular reynolds wrap 6.5mm again cut to fit.
5. this was the most time consuming part (for me ) I took an 12mm eye an holding the stem I rubbed each scale to get it's effect.
then painting, did't know what to pait it never see a plug so shiney, so I asked Etch for a suggestion an he said PURPLE/WHITE.

thats it the purple showed the CREASE in the foil on TOP so I hit it w/black to hide it , now it BLACK,PURPLE, SILVER, CREAM belly
(sorry) ETCH ran out of WHITE.
thats it
GOOD LUCK GOOD PLUGGIN

AND the last 2 pic's
GOOD LUCK GOOD PLUGGIN:smash:

Came out so sweet

incredible Job

Me thinks you've made a plug or three before

Gotta try that.

looking good.....

SWIMMER, a couple more then THREE:smash:
BUT my FIRST foiling attempt:uhuh:
It came out FAIR, NEED to get the BLENDING of the SCALE an FLOIL BETTER. going to do another one :wall: an try to put a SMOOOTH GILL PLAT on it. an take more time in Blending them together.
GOOD LUCK GOOD PLUGGIN:cheers:

So salty, what your saying is that you place the gil plate material on the plug and then wrap the foil over it, correct, or am I missing something here as usual?

Swimmer, YES going to construct a gill plate an place some FOIL on it w/ out the scale.:) an just crale the side body on this one not the whole plug:wall: going to TRY ANYWAYS if not will do the whole body
have to work out where to make CUTS to BLEND everything in, got any (I dears):confused:
GOOD LUCK GOOD PLUGGIN:uhuh: