Where can lathe tools be bought cheap?
 

Or do anyone here have any for sale or trade?

what do you need?
turning chisels?
I may have a few

Yes.............

did you get a lathe?

I'll take a look tom. in the shop when I get a minute and see what I have

you can pick up some cheap stuff at hardware stores
or go to beaver and get decent stuff or chinese crap

el cheapo:

Amazon.com: Jet WLC-8 8-Piece Carbon Steel Wood Turning Chisel Set 709008: Home Improvement

decent:

http://www.toolmarts.com/del_46-730.html

Rolls Royce:

Buy Turning Tool Set, 8 pc. at Woodcraft.com


check out Sears Too... they have a half decent starter set, that I have seen before...

I only use 3 tools and mostly only 1 ... Gouge ,, just to take the corners off, then your done with that .. A Skew to do most the shaping .. and a parting tool .. I use that to mark end of the plug or when copying another plug .. measure plug point diameters and copy points with a parting tool ... connect the dots at the end .. You can make a parting tool out of a big old flat screwdriver and a bench grinder. So you really only have to buy 2 tools ... gouge ,, skew ... and some I know skip the gouge ..

Tagger, Harbor Freight has a set of 8. They dull kinda quick, but can get you through for awhile.

Thanks Karl and everyone else who replied.