BM Schoolie Lip Question
 

Here we have a mini Musso Torpedo, BM Schoolie, Musso Surface Swimmer Jr..

Lips - Lefty 1 midslot, Lefty 2 ??? midslot, Lefty 2 midslot ???

The lip in the schoolie is identical to a lip I believe I removed from a BM Jr. MAKE SENSE?

Anyone know anything about the front face height differences between the Schoolie lip and the Musso lip to its right???

Like I said in my reply to your other post its a strange lip. Try a couple different lips and see what swimming action comes closest to the original.

schoolie lip is close to a BM jr lip but not quite
it's a tough match
I'm running into same problem . I used lefty lip on some they swam well .
Also used smaller lip I made lures freehand so some are fatter
fatter lip with small lip had nice wiggle

I take a lefty 2 & grind it down, Bm's jr lip is a pikie / lefty2 hybrid of sorts.

darn, more lips to make. Thanks for the picture J.

You can get some unbent lips from CCT and bend them,,, it might be close,,,

Jon, if the diameter is around 1"and it's not over 5-6" w non weighted tail, a lefty 1 mid will swim it fine.

Thanks guys
 

What are you Musso dupers using for lips in those Surface Swimmers/pines/maples??

Wonder if it would be worth it to have a bunch of those made. There is a place here in Waterford called SECONN Fabrication that does all kinds of metal work.

Musso Jr. Pine and Maple Lefty 2 high slot
Musso Jr. Surface Lefty 2 low slot
Musso Sr. Pine and Maple Pikie 3
Musso Sr. Surface Swimmer Lefty 2 low slot