Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   Boat Fishing & Boating (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=24)
-   -   A Paint question (http://www.striped-bass.com/Stripertalk/showthread.php?t=62992)

piemma 03-28-2010 06:29 AM

A Paint question
 
I have a gallon of West Marine CPP Ablative paint that is 3 years old. I used some of it and then sealed the can. I have about 3/4 of a gallon and it has not been opened since April 2007.

Can I use it?

thefishingfreak 03-28-2010 08:39 AM

sure. stir it up and use it. the copper isn't going to evaporate.

piemma 03-28-2010 08:41 AM

Quote:

Originally Posted by thefishingfreak (Post 757702)
sure. stir it up and use it. the copper isn't going to evaporate.

Thanks. Just saved myself well over $100

RIROCKHOUND 03-29-2010 05:22 AM

Take it to West and have it shaken.
Good as new.

piemma 03-29-2010 05:51 AM

Thanks Bryan, I will do that. It's actually the paint you got for me.

Raider Ronnie 03-29-2010 06:06 AM

Definitely suggest try to have it put on a shaker.
Maybe home depot or lowe's .
Can be done by hand but it won't be fun !

piemma 03-29-2010 08:48 AM

Thanks guys. Will do. i have a good relationship with the Sherwin-Williams dealer in No. Smithfield. I am sure he will "shake it" for me.

Clammer 03-29-2010 08:52 AM

paint for what ???????????

piemma 03-29-2010 10:19 AM

OH GOD!!! Why even bother:wall::wall:

Islander77 03-29-2010 10:21 AM

future refference for some reading this... I know they used to make a drill attachment, That was a mixer for paints... Ptu it in the drill and spin away till mixed lol....

piemma 03-29-2010 10:28 AM

Thanks Josiah

MakoMike 03-29-2010 12:34 PM

I have one of the drill bits to mix paint. Better and easier to have it shaken in a paint store or at worst marine.

Islander77 03-29-2010 01:03 PM

Paul welcome and Makomike.. Yes it is easier but unless you get lucky or know the place well most look at you like your asking for their firstborn... That drill mixer isnt the greatest but it works better than a stick and a hand.. bottom/ non fouling sucks to stir by hand.. as we all know:rotf2:

Van 03-30-2010 11:04 AM

Quote:

Originally Posted by MakoMike (Post 758090)
I have one of the drill bits to mix paint. Better and easier to have it shaken in a paint store or at worst marine.


X2, that is what I do. Got to go slow though. Just look at my garage floor !!!!:smash:

The metal will be at the bottom, so the stirrer works well to get it moving.

When I have leftover, I store the paint can upside down for that reason.

taJon 04-05-2010 07:56 AM

Quote:

Originally Posted by piemma (Post 757704)
Thanks. Just saved myself well over $100

yup now you can spend it on some tackle. It's like getting the tackle for free :uhuh:


All times are GMT -5. The time now is 12:06 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com