Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   StriperTalk! (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=12)
-   -   Cotton Cordell ? (http://www.striped-bass.com/Stripertalk/showthread.php?t=63234)

MAKAI 04-08-2010 08:35 AM

Cotton Cordell ?
 
Does it matter any if you load the bigger popper from the rear top or rear bottom or is it all the same & how much shot, an ounce I assume is OK.

Islander77 04-08-2010 09:37 AM

Can add an ounce I am assuming your talking pencil here.... Load it from top bottom and seal it up with some epoxy after you melt it back...

DZ 04-08-2010 10:17 AM

Quote:

Originally Posted by MAKAI (Post 760624)
Does it matter any if you load the bigger popper from the rear top or rear bottom or is it all the same & how much shot, an ounce I assume is OK.

Makai,
Try and contact Stiff Tip. He uses different loads for different applications. Has a special weight/load for the canal and a lighter load for general surf use.

DZ

Redsoxticket 04-08-2010 10:38 AM

It was mentioned that the bomber version and possibly the original cordell have chambers that have a gap of 1/8 inch between chambers.
Therefore using a lead shot of greater then 01 will prevent the shot from moving between chambers
Posted from my iPhone/Mobile device

Mike P 04-08-2010 01:39 PM

My friend uses 7 shot, and he says that one load is 1-1/8 oz. Just cuts the shell and dumps the shot into the plug.

Of course in Mass you need an FID card, at minimum, to buy ammo.

Redsoxticket 04-08-2010 02:14 PM

Purchase only the lead shot by the pound.
Posted from my iPhone/Mobile device


All times are GMT -5. The time now is 01:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com