Road kill /Dead Fish / New Sealer
 

Found some 1.3/4 x 28" sq strips of OAK, might have been ballister. my guess, cut to 7" sanded, dipped in the MINIWAX woodsealer, hung dry in a couple of hr's re-sanded an primed an painted, sealed,did them in a DEAD , or DYING, CRIPPLED, Fish style, they will hit the water Friday, going to fish thoes 2 all day, to see how they hold up. w, the new woodsealer now that my val-oil is gone.
Han Carved Rattle can Painted, weight in at 2.7oz
GOOD LUCK GOOD PLUGGIN:uhuh:

Very nice. That stuff dried that quickly, huh? Did you cut it with any solvents or just used as-is?

MINIWAX woodsealer Let me know if the paint falls off. I have never had any luck with that stuff.

1.Eric Roach NO just DIPPED in let it sit for a few 30sec. pulled it out an hung. came back in Ill say 2 hours, an sanded it primed, let that dry, an painted it that same day.

2. Mike. fished them for 2 days, 6 hours each day cast, after cast, looked at them this morning while cleaning my stuff they sat in the heat in my bag, an still look as good as day one. will be down this week ,need a few supplys, an Ill have them w/ me.

GOOD LUCK GOOD PLUGGIN

2. Mike. fished them for 2 days, 6 hours each day cast, after cast, looked at them this morning while cleaning my stuff they sat in the heat in my bag, an still look as good as day one. will be down this week ,need a few supplys, an Ill have them w/ me.

Salty,
Did you weigh the plugs before and after fishing to see if they gained weight from water intrusion?

O.D. Mike sorry for taking so long getting back to you, I finnish building them, an weight them, then take 'em out to get eaten:rotf2:
thats just me Im not a pro at this just HOBBY stuff:)
GOOD LUCK GOOD PLUGGIN:uhuh: