Rattle Can QUESTION ?
 

Been using KRYLON for a while, now my supply is low an just picked up some more :smash: BUT the SPRAY CAPS are not the same , they have an EAZY TOUCH 360 DIAL:fury: GREAT for all around spray BUT SUCKS for DETAIL QUESTION IS---> does any RATTLE CANNER out there know if they make a REGULAR CAP for the new cans:confused:.
GOOD LUCK GOOD SPRAYIN:uhuh:

Cant ya use a cap off a old can?that's what I always do.Unless your talking about a fat cap (one of those white caps with no tube on the bottom),I used to work for a place that used a spray cleaner with no tube on the bottom, I raided those caps and that what I use now for detail in place of fat caps.

Ryan560,
the new caps LONG STEMS,an SWIVEL HEADS, Ive tried
adapting outhers but dont work, they have GREAT selection of NEW
COLORS to work with, Im still look'en:wall:

#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&, Thank you.

GOOD LUCK GOOD PLUGGIN:cheers:

Same problem with Rustoleum a couple years ago. Hard to do nice work anymore. I bought some of the grafiti caps and they did nt fit.
Time to learn the air brush.

Charleston, to old to change now, guess Ill keep lookin:fury:
GOOD LUCK GOOD PLUGGIN:uhuh:

I hear ya! I have an airbrush and have never used it. :wall:

Charleston, I was playing the the caps, an pulling the CENTERS OUT,
an trying different ones. then it HIT ME:smash: if you look at the white spray swivel that the paint shoot out:fury: it has 2 bumps on it:fury: that SPLAYS the paint :wall: well I sanded them down:uhuh: an now it's like a REGULAR spray, so Im sanding them all down an wont worry about that wide spray any more. got a Wonderbread to do this week an will use the sanded caps on it :uhuh:so if you want to
keep using KRYLON w/ thoes SWIVLE CAPS:uhuh: Id try sanding them CAPS DOWN, try it. you might like it:jump1:will post pic when done.
GOOD LUCK GOOD SPRAYING:bounce:
P.S. fine sand just a little the try spraying then sand more till your satisfied. DONT sand all the way it will make the HOLE bigger an more paint will shot out.