Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   The Scuppers (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=22)
-   -   Hot Water Heater Help. (http://www.striped-bass.com/Stripertalk/showthread.php?t=68080)

zacs 12-20-2010 10:52 PM

Hot Water Heater Help.
 
Well, walked into basment to a good flood of water around the hot water heater...:wall::wall:

Can anyone recomend somebody in the RI EG/Warwick/NK area to come fix, or knowing the luck I have been having -replace- this thing?

This is beyond my DIY comfort zone.

All advice welcome.

Thanks

Zac

zacs 12-20-2010 11:17 PM

actually probably anyone in RI would be fine....

I hate to surf the net, then just dial and cross fingers that I get a good, honest, knowlegable person...

Saltheart 12-21-2010 12:42 PM

Do you have Gas service from National Grid? They are back to selling water heaters again. I bought my replacement from them and including installation , it was the best deal around for a high end water heater. I got the highest rated , longest warrantee model and installed I think it was $450 for a 30 or 40 gallon (I forget the size off hand)

There was a time when they offered a 20 year warrantee on AOSmith or some other big names but now I believe the best warrantee is 10. What I learned was a 5 year warrantee heater will probably go in 5 years. A 7 year warrantee one will go in 7 but if you get the best one (10 year warrantee , it will last somewhat longer than the ten years. Mine was maybe "American Water Heater" or some name with American in it.

zacs 12-23-2010 11:27 AM

thanks saltheart. It is propane fired, unfortunately, and powervented to boot.$$

It seems that most AO Smith have 6 year warantee now. That is what this was. it lasted 9 years(to the day!), so I guess it worked out.

three plumbing issues in 2 weeks.

Clogged main line(septic)... fixed myself..pain in the a-- and disgusting.

Hot water heater burst.... call in pro help... paid too much.

supply line to kitchen sink let go, easy fix but big wet mess..

Ugg, what a December....

tattoobob 12-23-2010 03:42 PM

Quote:

Originally Posted by zacs (Post 820766)
supply line to kitchen sink let go, easy fix but big wet mess..

Ugg, what a December....

Is it something I did?

FishermanTim 12-23-2010 03:50 PM

At least it didn't happen during the January/February FREEZE.

zacs 12-26-2010 09:41 AM

Quote:

Originally Posted by tattoobob (Post 820844)
Is it something I did?

no Bob. It was the crappy materials that are used in the kohler faucet we used. The piece of $hit plastic connector on the line that connects faucet to spout must have been knocked by something under the sink and broke....


All times are GMT -5. The time now is 02:29 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com