Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   Plug Building - Got Wood? (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=19)
-   -   Pichney Jointed Jr?? (http://www.striped-bass.com/Stripertalk/showthread.php?t=68585)

chefchris401 01-15-2011 02:18 PM

Pichney Jointed Jr??
 
3 Attachment(s)
Ok so in looking into further I think this plug is a pichney jointed jr.

Heres some info from the bassdozer site.

"Danny's Jointed Junior (third in photo) bore a similarity to Danny's Junior swimmer (bottom). Other traditional jointed eels (top and second) were slender-bodied and effective mainly in slow-moving water or gentle surf. Danny's Jointed Junior was not typical of other jointed eels in that Danny's Jointed Junior was wider-bodied and more robust to handle moderate surf and stronger flows (although the Jointed Junior also had its limitations).

Stronger and rougher water was generally not the domain of jointed eels nor the Danny Jointed Junior.

It is my impression which may be mistaken, that Danny's Jointed Junior plug model is very rare."

Heres some pics, more to follow.

So my question is, is it a real pichney jointed junior or a copy cat plug??

Thanks for the help

chefchris401 01-15-2011 02:19 PM

3 Attachment(s)
3 more

chefchris401 01-15-2011 02:22 PM

3 Attachment(s)
Some more pics

chefchris401 01-15-2011 02:23 PM

1 Attachment(s)
Last one.

eskimo 01-15-2011 02:43 PM

others will have more knowledge but both the tail and the wrap on the joint don't look like his. he usually does more of the "coffee roll" tail wrap (similar to a BM). Tail grommet is a little weird to.

On the other hand it was common for him to not have the lip flush with the plug but out a 1/8" or so. Sure looks like one

eskimo 01-15-2011 02:45 PM

Tail also tapers out a bit more then the bass dozer reference pic. Does the wire seem to be a thinner gauge? the wire looks similar to the wire on a masterlure. Along with the paint peel.

Lip also doesn't look like his typical lip

Spiderman 01-15-2011 03:12 PM

I dont think it is a Danny. Although he did some different versions of plugs, the plug appears longer, the tail tapers quicker on yours and the lip and tail grommets are not right.
Posted from my iPhone/Mobile device

wrikerjr 01-15-2011 04:08 PM

Danny's lips were very different

UserRemoved 01-15-2011 04:11 PM

That's not a danny. I have a whole bunch of his jointed stuff. Looks nothing like that.

chefchris401 01-15-2011 04:14 PM

Any ideas on what it might be???

Like stated before I bought it with the intentions of turning some jointeds and using that plug as a reference.

Either way a good purchase for what I paid.
Posted from my iPhone/Mobile device

wrikerjr 01-15-2011 06:53 PM

Quote:

Originally Posted by chefchris401 (Post 827860)
Any ideas on what it might be???

Like stated before I bought it with the intentions of turning some jointeds and using that plug as a reference.

Either way a good purchase for what I paid.
Posted from my iPhone/Mobile device

Garage builder is my guess, lots of sloppy things in the plug. If your gonna copy that question many things.

UserRemoved 01-15-2011 08:01 PM

I'd agree with garage builder. Stamped lip commercially made no doubt.

stripermaineiac 01-15-2011 08:42 PM

Compare it to some of the older Murrats. Looks like some of the older ones I have..

numbskull 01-16-2011 08:42 AM

Not a Pichney
Not a homemade.

I'd guess Masterlure, although it is different than their more common jointed eel.

It looks older than a Pichney (grommets and brass wire).....it might be the plug Pichney copied to make his.

Very cool


All times are GMT -5. The time now is 09:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com