lead cost
 

anyone know what the current cost of lead is??

thanks.

Lead prices from the London Metal Exchange (LME), news , charts, historical prices.


$0.87 per lb when bought in bulk in commodity exchange volumes

Lead is running $2-2.50 a lb on the commercial market, it can be had on CL and Ebay for $1.00-1.50 a lb depending on what you want and how clean it is.

last load I bought was only .10......half ton cost 100.00....last summer and theres still tons left...but I'm not telling where. Alittle time melting it down w/free gas and bob's your uncle..clean lead.

Lots of good info in this helpful post:smash:

you go Paulie G.S.

just about as much info in this one as well:hs:

Oooh - Old Timer fight :love:

Lol!!!!
Posted from my iPhone/Mobile device

get the defibrillator ready:uhuh:


befriend your local dump worker. Has always worked for me.

scrap batteries were 9.00 each for the standard size .when I scapped out on WEds .
They all agree that prices are going down with the [war] ending .

That,s not going to stop them from stripping my listings:smash:

I wish they would take the whole building / then it would be easier to sell ;;:soon: :jump1::jump1:

Not nice to pick on my old bud GN...he just thought things were getting abit boring on here and felt like stirrin the pot.
U go GN:love:

Go to your local gun range . You can sift out a 5 gal bucket full in short time and melt it down. You get all you want from used bullets and it will prob be free. Ron

If you are making lots of jigs , virgin pure lead makes life a lot easier. If you are doing just a small amount , then you can melt down almost anything. I know that when Smokey and I did thousands , the pure lead made it so much easier as the optimum pouring temp stays the same. when you use scrap lead , you have to play with each crucible load to get a good pouring temp. ASlso , some crap in there can mean you have to pour at a higher temp. this means increased risk from fumes and also beats the hell out of the specialty molds we have for skin jigs. For the regular do-it aluminum molds , pouring temp just means you may have to let the molds cool more often but if you have plaster or rubber molds for specialty shapes , high pouring temps will kill them fast.

I recommend that you buy pure virgin lead in ingot form.

me too!!!!:rotf2:

Old fart fight

Should I sell my stock in cialis now?
Posted from my iPhone/Mobile device

Cialis gives me a headache. Viagra for me!!!

They both leave me pretty stiff

A good way to melt down lead to get the slag out of it is an old 2 burner Coleman stove and a stainless pot. It's how I make my ingots and it is done outside so fumes are less of an issue.Pure lead is getting hard to find up here as most of it has been given to China by the idiot politicians.These morons want to outlaw it completely forgetting the clay is full of the stuff LOL.

I found a stash of frozen turkey necks in the freezer:confused:

free to 1.50+lb, i just got some for a buck a lb, .75 a lb, .20 a lb, 300 lbs free from gun club, im lazy so i usually pay .50lb but i belong to 4 gun clubs so on nice days i can get a half bucket in less than an hour-50-60lbs..free.

know what your melting guys...

There's some NASTY stuff in some of these things...such as ARSENIC....

Bullet lubes.....yick smells like my first girlfriend.

In a gas form that is just friggin nasty.

piemma who you kidding you aint' had solid wood in 10 years :hee:

lead ban
 

i read online that the state of MA is trying to ban all lead materials used for fishing because of wildlife. maybe already passed and will be in effect for 2012 on freshwater tackle. something about the loons?

Any lead product weighing less than 1 oz. including jigs, sinkers, spinner baits ect. as of 1-1-12. Lead fishing tackle has been banned for years in all DCR resevoirs namely the Quabbin, Wachusett and there tributaries.

The birds? Or the people that have been smelting in less than adequately ventilated areas?

I heard that :D

Posted from my iPhone/Mobile device

ventalation???

Do it outside.

piemma who you kidding you aint' had solid wood in 10 years :hee:[/QUOTE]

Now my secret is out:rotf2:

who needs vEnTiLAtION