Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   Plug Building - Got Wood? (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=19)
-   -   Does anyone heat their plugs before Sealing Spar/turps (http://www.striped-bass.com/Stripertalk/showthread.php?t=76301)

Muskyslayer96 02-28-2012 09:22 PM

Does anyone heat their plugs before Sealing Spar/turps
 
Hey fellas,

Just curious, I know people heat there plugs at 250 degrees before they seal with thinned e-tex, but does anyone heat their plugs before sealing in Spar / turps? Maybe not @ 250 degrees but any thoughts on its usefulness/
I'm wondering even if the plugs sat in the drying rack @ 120 degrees for awhile and then into the sealer would it help or prolong the drying?

Thanks in advance for any comments,

MS

iamskippy 02-28-2012 11:35 PM

Depending on the room temp, imo if your ambient temp is with in the specs of the sealer, i dont see a benefit, however, i maybe wrong but its be mentioned on other threads that it opens the pores of the wood, but you would be taking a hot piece of wood into a ambient solution, and i dont see the benefits of that.

However you are in the arctic, and may benefit from it
Posted from my iPhone/Mobile device

Rockfish9 02-29-2012 07:40 AM

ive done it.. for experimentation purposes.. it does provide a slighly deeper seal ( discoverd by pulling a "Band Saw Eddie" on the plug after the soak) IMHO..not worth the extra work to preserve a hunk of wood that I can spin and sand in 3 minutes.

Muskyslayer96 02-29-2012 07:47 AM

Thanks for the tips fellas

MS

ProfessorM 02-29-2012 10:08 AM

I agree with Joe. Not worth it. I find the wood to seal very good at room temp.
Posted from my iPhone/Mobile device

pbadad 03-02-2012 07:29 PM

I heat the hard wood plugs Maple & birch. Heating really draws the sealer into thew wood. I feel especially with rock maple you need ample penetration to prevent cracking along the hook holes. Heat oven to 200 degrees and place plugs in an aluminum foil pan for 15-20 minutes then place in sealer. I get the sealer poured while the plugs are heating up. I use Val-oil and pure turps. 60% val & 40% turps. I also used Helmsman spar varnish 60/40. My last batch of big maple needles gained 3-4 grams of sealer soaking for 3 hrs. Dried in 2 days. Gray pad sand down, wash with denatured alcohol and prime.

stripermaineiac 03-02-2012 09:45 PM

Read the turp can real good. That stuff has a pretty low flash point if I remember from school. Not self heating like linseed oil but very flamable when warmed.Gettin the soak inisn't worth gettin hurt.

pbadad 03-03-2012 06:04 AM

I realize the hazards of turps but when I dip them the're warm to touch. Thanks for your concern.


All times are GMT -5. The time now is 07:05 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com