Rigging tools
 

Any idea where I can get a rigging needle?

Saltwwater edge, red top are two that i know of. I never asked Mike ay M&D's.

Any shop that has a decent offshore fishing section should have them.
Posted from my iPhone/Mobile device

If you have plug through wire you can make one in about 3 min...
Posted from my iPhone/Mobile device

I've bought a few different ones. The one I made from a coat hanger is the best I've found.
Posted from my iPhone/Mobile device

River's End has all the rigging gear you need

CMS
Posted from my iPhone/Mobile device

Jo Ann fabrics

Michaels

Saltwater edge

I use plug thru wire, free of you cut up an old plug or plug with no mojo
Posted from my iPhone/Mobile device

chinese food take out box - if you cant get to plug wire or a rigging needle

Thanks Guys.

I was picturing more of a "surgical" tool...Im sure I have something I can jam through there....

Are you talking a rigging needle for eels? If yes

Cut the straight sectipn off a coat hanger. Hammer one end plat for about 1/2 an inch. drill a hole in the flattened section , using sandpaper or a grainding wheel , grind the other end to a sharp tip. In fact , it can be too sharp. You want it to go through the eels inner canal , not through the meet so say medium sharp.

Yes Eels. This worked Pissa! Thanks!

Thats the same procedure for ss through wire....
Posted from my iPhone/Mobile device