CSA WINTER DEMO DAY
 

Save the date January 26 St.Lawrence church killingworth ct.
7 Hemlock dr.
This will be our second annual demo, swap,tackle sale, chili / hotdog eating winter show.
Stay tuned for more info but, it's opened to all its free and if any one wants to set up one or two tables to offer up something fishy whether it's a demonstration or you have something to sell.
Last year we had over 100 fisher people show up and this year promises to be bigger.
Feel free to call text pm carrier pigeon me or just post up here.
Dave Cipriano
860-227-5236

I'd be there, but Fiabbit is on the same day.

csa demo day is a not-to-be-missed event!

I will be there with the most of the century surf rod line up.

so far i will have the following rods to see and check out

Slingshot series, moderate fact action
1145 9'6" 1 to 3 oz
1267 10'6" 2 to 5 oz
1327 11' 2 to 5 oz
1328 11' 3 to 7 oz
1449 11' 4 to 8 oz

Stealth series, moderate action, more parabolic
10' 1 to 3.5 oz
11' 1 to 4 oz
11' S2 2 to 5 oz

SPOD 12' 3 to 6 oz

Hoping to have some other rods done by the show, or at least the blanks with me and some prototype rods too.

Will probably bring some eats with me too.

Thanks for the invite guys.

Hi Chris,

Any chance you'll have the 9'6" sling shot?

Thanks

yup, just updated the list, its built conventional with a shimano calcutta 400.

Is the 1449 11'?
Posted from my iPhone/Mobile device

It's 12', but mine is cut to 11' for jigging and chunking, rated 4 to 8oz
Posted from my iPhone/Mobile device

Love my 1328,1449 cut down is something to think about for jiggin.
Posted from my iPhone/Mobile device

Any plans for a 10 ft that throws 1 or 2-5 or 2-6?
Posted from my iPhone/Mobile device

I should have the proto "canal jigger" 2 to 6, 10ft with me there, or can meet up with you jay. Just waiting on some blanks to show up.
Posted from my iPhone/Mobile device

Dave,
Could I set up a table for book sales?

DZ

Plenty of room and we would love to have you.
Posted from my iPhone/Mobile device

Thanks Dave - I'll plan on attending. Let me know if there is anything I can do to assist.

DZ

And so far we have :
Mike Mullen Demo- (he of monster jointed needle fish fame) will have a lathe and will be turning plugs

Bill Goeben Demo - Tying saltwater teasers

Billy Delizio Demo (he of the world famous Billy D stubby needles) making a skin plug

Big Tim Johnson Demo how to cook your Bass with a smoker. Tastes great

And more Demos being added- each scheduled at a set time for around 20 minutes or so --you can see what you want-

also

Chris with Century Rods
Dennis Zombrotta- Book signing: Surfishing Around the Block
Joe Lyons- Fish Hard Live Long merchandise
Craig Cantelmo - showing Van Staal Reels

Also lots of tables of plugs and gear for sale. I will have a table with custom plugs most unused- such as Beachmaster, Habs Sr. RM Smith, Afterhours, Northbar... low prices. All kinds of rod and reels and also one member with a collection of vintage atom plugs- some for sale. Billy D and other CSA member plugs that you can't get anywhere else. Last year bargains were really really good.

A nice church hall type winter Surfcasting get together. Get out of the house- see some pals.

Entrance is free but a $3 donation is appreciated.

Being new to this site, is it a stupid question to ask what CSA is?
Posted from my iPhone/Mobile device

Not stupid- we should use the full name.

Connecticut Surfcasters Association club. Founded in 1993 by some CT guys who started going to Cuttyhunk before it was well known and the Club grew from there. Our 20th year.

see website:

Welcome to the Connecticut Surfcasters Website

Great group of guys and a few female type surfcasters.

What time does it start, or more importantly what time can I get in to set up?
Posted from my iPhone/Mobile device

will there be free vendor decals? lol

Just added WoodyCt will be demonstrating how to make hand carved plugs
Posted from my iPhone/Mobile device

Thanks to Toby we now have Gary Soldati bringing his GRS plugs line and offering a demo on cutting and installing VMC hooks.
Posted from my iPhone/Mobile device

Not sure if Chris has one but we have the 1267 10'6" 2-5oz. It will throw 1 oz. and can also be built as a 1267C ( 6" off butt for a 10')

yup i have one, actually 2:uhuh:

it will be there, along with the new 1025 8'6" rated 1/2 to 2oz, and the 9'6" 1145 rated 3/4 to 3oz.

should have some pluggage too, if I can find the time to finish em.