My dad's great shop tools and snowblower
 

My dad has a fully equiped shop in Brockton and years of contractor tools to sell. He has cancer and wants to get as much organized as he can (he is 92) to make it easier for my mom. He has some great stuff (high quality tools- old but 1st rate). You can contact me at 617 694 0723 (call or text)or PM me about it. Partial list below. I have pictures of everything. I know he would like $200 for the staging and wheels, but all other prices are negotiable and a bulk buyer or 2 or 3 for a lot of the items is preferred. Thanks, Bill

Lathe- Craftsman 45 inch track (from 1930)
GE 1/3 HP motor, 8 carving bits, 2 calipers

Millers Falls Grinder (1/4 HP) 1 stone wheel, 1 wire wheel
Craftsman Planer Joiner- craftsman ½ HP motor
On wheeled 42” x 16” inch 24” high bench with sawdust bin
Disc and Belt Sander combo- Power King-1/2HP motor (approx 9” disc and 6” belt)
On 36”x24” 31” in stand
Drill Press- Delta, Sears Roebuck, with moveable platform
Stand alone 68” tall
Table saw- Walker Turner 10 ½” steel table 36” X 42 “ with removable 36’ steel side extension 2hp 2 phase 220AMP
Millers Falls heavy duty ½ drill
Millers falls Skill saw with metal case
Skill skill saw (7 ½ “)
Rotary hammer- Milwaukee ¾” heavy duty in case with bits
CLAMPS-8 pipe clamps (assorted length pipes)
10 Wood clamps (12”) Cincinnati tool company Hargrave trademark (approx 1930)
@50 C clamps (3 and 4 inch gap) metal
Staging- WACO
4 pieces 5’ by 5’
2 pieces 30’ high by 5’
2 pieces 30’ wide by 5”
2 pieces 30” high by 30” wide
4 8” wheels for the staging (heavy duty)
All braces plus 1 platform plus several planks

Workbench 60”x 33” 35 ½ high with attached wood vice and heavy pipe legs
Heavy metal vice with removable 5” jaw plates 60” 33” workbench
5 Diston hand saws
Hinge setting kit
Lockset kit
1 large RL Carter router
2 Handyman routers
I electric Block plane (porter cable)
Craftsman 3” belt sander
Remington concrete nail gun (22?)
Bobcat Snowblower 2 stage 7HP, 24” w/rubber wheels with chains

Hey Bill, always sad to hear about stuff like this.

Thanks, he is still strong and doing well. I was visiting him 2 weeks ago and we were in his shop and he had his hammer and was knocking the brass tulips of door handles off so I could take some scrap metal for him. He still keeps busy. Doing it on his terms at age 92. He just has lot's of great old tools and stuff that I will probably not use so selling is best option.

Nothing sad about a 92 year old who is still scrapping!
Sounds like the deep end of the gene pool for you.

Think you can shoot some pics of the tools my way? You said you already had them right?

pics of the Bob Cat please. Do you know what he wants for it?

I would love to see pics of the lathe and the table saw
Posted from my iPhone/Mobile device

here are some pictures, more to come
 

Lathe, Tablesaw and bobcat snowblower

More tool photos
 

clamps (these wood clamps go for $20 each either new or more as antiques). I kept a few and my daughter has one that she says reminds her of Grandpa Bills shop. Everyone should have some of these.

Pipe clamps and C's belong in any shop as well.

grinder, planer joiner and disc/belt sander combo
 

All american made, used by a professional finish carpenter. He built the house he and my mom live in in 1955.

Bass on his plugs
 

For those who know him and his second "career" as a plug builder.

Bill.
Hoping for many more years for your dad.

Would you have a pic & price on the drill press ?
Thanks

here is drill press picture
 

as far as price, make an offer.

hammer drill and bits and heavy duty drill photos
 

here are a few more items

WACO staging pictures
 

He wants 200 for the staging and platforms and wheels, wheels alone ar e worth almost that much.

additional staging parts photos
 

more staging shots.

workbenches and vices and routers
 

more photos. He also has a much larger R. L. Carter Router.

He would like $200 for the staging, wheels and platforms, $150 for the snowblower and best offer for other items. All is negotiable . Serious potential buyers can see the items at his house in Brockton. That can be arranged through me at 617 694 0723. I just want to manage and limit the disruption. Though he and my mom can see visitors preferably day time. I would like to bundle as much to a few buyers if possible.

As far as Plugfest for this year I am sending Slipknot one of his plugs to enter as he does not travel anymore.

Bill

If I were closer I would take the snow blower. I don't need it, but they are such good machines. If there is someone that needs a snow blower, the Bob Cat is far superior to almost anything you could buy today. They launch the snow a mile. If you have a snowblower that clogs, bogs down, or struggles with wet snow, you may want to get this and sell your other blower.

You're right. That Bobcat has a unique two stage auger system that you just don't find in any of the newer snow blowers. Too costly a design for most of them now.

Interested in the snow blower. I'm out of town until Saturday.

How's the Bobcat run?

I am interested in the snowblower, does it run, when was the last time it was started. I live in RI but in mass during the day.

snowblower ran last season
 

It is a pull starter and too hard for my dad. Call me if you want to come by and see it or try it. I believe someone wants to come by an look at it this weekend as well. I am at 617 694 0723.

Thanks I fixed mine today, if it's still around down the road I may be interested.

The snowblower is now sold. Still lots of great tools. Look at the pictures and make me offers. Staging still available too.
Thanks for all the interest so far.
Bill
Posted from my iPhone/Mobile device

Bill and I cannot make plugfest, but if anyone is interested in some shop tools, please mention this classified site to them. Have some serious interest in the clamps and and the belt/disc sander but lots of other great stuff still available.
Thanks,
Bill