Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   Boat Fishing & Boating (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=24)
-   -   serviceing a live well pump (http://www.striped-bass.com/Stripertalk/showthread.php?t=89155)

blue oyster 09-13-2015 12:11 PM

serviceing a live well pump
 
I have a piranha live well pump in my boat and I use all the time ,(I fish almost exclusively with live bait) I go through a pump a season , the one in the boat now sounds like a coffee grinder , I only have 1 spare pump left as they now are discontinued , is there any way to service them , if not when the last 1 goes I have to change the through hull fittings , they look like 1 piece not designed for repairs ?

nightfighter 09-13-2015 01:36 PM

Not sure what model you have, but I googled piranha live well pump and got a lot to choose from.....

Guppy 09-13-2015 06:29 PM

My guess is these pumps are factory sealed without the intention of being repaired. Would back flushing the pump help, could be junk up in it. Surprized the thru hull needs removal.

I have the same problem at present myself, mine sounds like a sick parrot and surprised it's not blowing the fuze.

Boats!

Raider Ronnie 09-14-2015 05:08 AM

Livewell pumps suck! .
Makes no difference brand, style, model. They all suck
Posted from my iPhone/Mobile device

Van 09-14-2015 06:57 AM

Quote:

Originally Posted by blue oyster (Post 1081492)
I have a piranha live well pump in my boat and I use all the time ,(I fish almost exclusively with live bait) I go through a pump a season , the one in the boat now sounds like a coffee grinder , I only have 1 spare pump left as they now are discontinued , is there any way to service them , if not when the last 1 goes I have to change the through hull fittings , they look like 1 piece not designed for repairs ?

NO, they are throw-away. There are no bearings or anything inside, just worn plastic.

Some Rule pumps have removable motor housings. But they cost about as much as a whole pump. I have a dual inlet rule and kept a spare motor on board, but I am getting way more than one season out of them. Mine is also been discontinued, so once I go through that last motor replacement, on to something else.

thefishingfreak 09-14-2015 10:56 AM

Get the bait century from west marine. 3 year warrantee you will never have to buy another one. You just exchange at west, no questions asked
Posted from my iPhone/Mobile device

Poncho 09-14-2015 04:23 PM

Funny reading this. Mine is a year old it's a rule pump and it just #^&#^&#^&#^& the bed with no explanation
Posted from my iPhone/Mobile device

blue oyster 09-14-2015 04:50 PM

Quote:

Originally Posted by thefishingfreak (Post 1081561)
Get the bait century from west marine. 3 year warrantee you will never have to buy another one. You just exchange at west, no questions asked
Posted from my iPhone/Mobile device

I will have to check this one out , thanks

Raider Ronnie 09-14-2015 07:25 PM

Quote:

Originally Posted by Poncho (Post 1081595)
Funny reading this. Mine is a year old it's a rule pump and it just #^&#^&#^&#^& the bed with no explanation
Posted from my iPhone/Mobile device


Rule use to be a good pump, made in Gloucester Ma. USA
Now made in Gloucester Mexico South of the border

Sea Flat 09-15-2015 11:27 AM

Quote:

Originally Posted by thefishingfreak (Post 1081561)
Get the bait century from west marine. 3 year warrantee you will never have to buy another one. You just exchange at west, no questions asked
Posted from my iPhone/Mobile device

Cool, thanks for the advice. My pump just went, it's on my list of fixes, I will look into that pump.

thefishingfreak 09-15-2015 12:11 PM

I use the bait century 1100 it is plenty of flow for any bait in my 55 gallon (50 gallon capacity) barrel livewell
Posted from my iPhone/Mobile device


All times are GMT -5. The time now is 10:07 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com