Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)

- StriperTalk! (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=12)

- - Van Staal pliers question (http://www.striped-bass.com/Stripertalk/showthread.php?t=90153)

Raider Ronnie

03-05-2016 11:47 AM

Van Staal pliers question

Closer to the jaws, anvil or cutter ?
Need to order a replacement and don't remember which is which.
Thanks in advance.

tattoobob

03-05-2016 02:42 PM

replace both

Raider Ronnie

03-05-2016 04:46 PM

Quote:

Originally Posted by tattoobob (Post 1095377)

replace both

That wasn't my question and & $35.00 each I'll just get the 1 since the other half is fine.
Posted from my iPhone/Mobile device

Dave Ri

03-05-2016 06:08 PM

Van Staal pliers

Ronnie ,

Look at the inserts , one is flat on the cutting edge the other is more to a point the flat is the anvil the pointed one is the cutter. beware i heard a while back there was a bad run of these parts , the design is such that the large hole for the screw weakens the insert being Tungston Carbide .

Good Luck

Dave

In The Surf

03-05-2016 08:20 PM

Quote:

Originally Posted by Dave Ri (Post 1095393)

VS made and released new cutters late fall, early winter last year.

tattoobob

03-05-2016 11:32 PM

Quote:

Originally Posted by Raider Ronnie (Post 1095385)

That wasn't my question and & $35.00 each I'll just get the 1 since the other half is fine.
Posted from my iPhone/Mobile device

Sorry Ronnie last time I replaced mine it cost $22 a piece so I did both

All times are GMT -5. The time now is 01:13 PM.