![]() |
VHF BATT LOW
got this message yesterday could receive but when I attempted to Transmit saw BATT LOW.. engine off with 2 batteries charged before the trip .. however with the engine running no issues ??
Batterie connections are tight no corrosion and all connection to the radio are tight and the BATT LOW happens when electronics are on or off? any other ideas to find this gremlin |
Have you put a voltmeter on each battery. Just cause you changed before the trip doesn't mean they are holding a charge.
One may be 12.6 and the other only 9.6 and drawing combined down. Try engine off with one battery, and then the other. Getting the alarm on both or just one? |
Quote:
|
There's also a hi/low setting on the radio
Posted from my iPhone/Mobile device |
Quote:
|
I did as you all have suggested prior to reading your responses . And you were all spot on . With batterie switch on 2 got the batt low. Tested each bank and got same message only on my deep cell .. problem almost solved .. thanks everone
Posted from my iPhone/Mobile device |
Wayne , ya stayed home today ?????????
|
You probably have an inadequate gauge wire running too far with cheesy connections to the radio itself.not providing enough amps at the radio
Posted from my iPhone/Mobile device |
Quote:
found some in bristol harbor Tight lipped found some small blues on Ohio ledge |
they kept swimming by us all day . Denis couldn,t get them to hit ><>
|
All times are GMT -5. The time now is 03:38 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com