Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

tlapinski · 07-19-2013, 09:28 AM

Those are all juniors. They changed size and weights over the years. As for re-wiring, it can be done by attaching a car battery to each end of the through-wire, let it get red hot to melt the plastic and pull out the wire (with pliers.) Rewire through the hole. It is not an easy or safe job, but it can be done. Might be best to just go with the existing hardware unless it is toast.

07-19-2013, 09:28 AM	#3
tlapinski All up in the Interweb! iTrader: (1) Join Date: Mar 2002 Location: In the dog house. Posts: 5,205	Those are all juniors. They changed size and weights over the years. As for re-wiring, it can be done by attaching a car battery to each end of the through-wire, let it get red hot to melt the plastic and pull out the wire (with pliers.) Rewire through the hole. It is not an easy or safe job, but it can be done. Might be best to just go with the existing hardware unless it is toast.
	Co-Host of The Surfcast Podcast "Out there in the surf is where it's at, that's where the line gets drawn in the sand between those who talk fishing and those who live it." - a wise man. One good fish, a sharpie does not make... Certified rock hopping billy goat.