Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Van · 09-08-2003, 07:48 AM

Depends on how hard it hit.
Try to determine of the shaft got bent. Thats much worse than the prop. Was the prop stainless or Al. If Al hopefully you are OK.
You can try to spin the shaft when the prop is off, but you really need to attach a surface micrometer and see if it was a wobble.

This is all based on experience (bad experience!)..

09-08-2003, 07:48 AM	#2
Van zoom iTrader: (0) Join Date: Apr 2002 Location: Quincy Posts: 4,145	Depends on how hard it hit. Try to determine of the shaft got bent. Thats much worse than the prop. Was the prop stainless or Al. If Al hopefully you are OK. You can try to spin the shaft when the prop is off, but you really need to attach a surface micrometer and see if it was a wobble. This is all based on experience (bad experience!)..
	~..~..~.. ><((((º> Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.