Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

N.ShoreFisher · 08-09-2013, 03:58 PM

Well, here it is. I'm sure it's not much to some people, but it was by far the most technical thing I've done thus far. It has 2- 50 cf/m bathroom vent fans. The vent off the fan was 3", so I used 3" 90deg duct brackets to a 3" T, then fed that into a 4" flex duct. I couldn't seem to find any 3" flex duct, so I used a zip tie to snug it down. A few screw in hooks and a hanging wire should give me options depending on the size of plug I'm spraying. Used a 17"x25" febreeze furnace filter.

08-09-2013, 03:58 PM	#1
N.ShoreFisher Annisquam Assassin iTrader: (0) Join Date: Apr 2012 Location: Peabody, MA Posts: 669	Spray Booth Well, here it is. I'm sure it's not much to some people, but it was by far the most technical thing I've done thus far. It has 2- 50 cf/m bathroom vent fans. The vent off the fan was 3", so I used 3" 90deg duct brackets to a 3" T, then fed that into a 4" flex duct. I couldn't seem to find any 3" flex duct, so I used a zip tie to snug it down. A few screw in hooks and a hanging wire should give me options depending on the size of plug I'm spraying. Used a 17"x25" febreeze furnace filter. Attached Thumbnails Last edited by N.ShoreFisher; 08-09-2013 at 06:05 PM..
	Calling fishing a hobby is like calling brain surgery a job. ~Paul Schullery There he stands, draped in more equipment than a telephone lineman, trying to outwit an organism with a brain no bigger than a breadcrumb, and getting licked in the process. ~Paul O'Neil, 1965