Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Eric Roach · 10-13-2013, 05:26 PM

So, for the rod with the longer reel position, it'll be about 30" from the spool face to the 1st guide (assuming you wouldn't want to place the stripper further than the 1/2-way point on the blank.) Even with mono, I think that will still work.

BTW, which Alconite guide type(s) are you thinking about using on the rods? That will help identify how to place them and whether or not to use COF or Kirkland's NGC layout.

10-13-2013, 05:26 PM	#5
Eric Roach Big E Join Date: Dec 2009 Location: Seabrook, NH Posts: 681	So, for the rod with the longer reel position, it'll be about 30" from the spool face to the 1st guide (assuming you wouldn't want to place the stripper further than the 1/2-way point on the blank.) Even with mono, I think that will still work. BTW, which Alconite guide type(s) are you thinking about using on the rods? That will help identify how to place them and whether or not to use COF or Kirkland's NGC layout.