the donnmars are made in both stainless steel and titanium. i have the stainless CP950's they run about $110. they will rust, but a quick shot of WD-40 after each trip and i have no rust on this pair. as i said earlier, you send them back with a check for $20 and they send you a brand new pair. here is a pick of the titanium CP950Ti's. the stainless look the same except for different colored rubber. they are 7 and 3/8" long. i would steer anyone looking into these away from the smaller models. the cutters are no where near the same thing. i think that the two smaller sizes they make are geared more towards freshwater guys. as i said, i already had a pair of VS's, and now i use these. i would rather pay for the Donnmars than get a free pair of VS pliers. the pliers are the only VS product i would not recommend!
