|
I do something similar to what Christian showed. Difference is that I use springs on either end (picked them up at Homies) of the plug rather than rubber bands. I also don't use anything to hold the swivel like he shows. Yeah, they bounce back and forth as they turn, but they are inside a grommet, so no epoxy there. Just don't hit the swivels with epoxy as you coat and you'll be fine. I occasionally get a little epoxy on the edge of the grommet and the swivel sticks to that. Pretty easy to pop them off. Just make sure they rotate correctly after doing that and you'll be fine.
Jigman
|