Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

ChrisH · 01-13-2004, 12:30 PM

I just bought this ball 1" ball shaped burr...and it works real well. The cutting surface stays clean. I use it in a jig like the one Jigman has shown on the drill press.

here is a link : http://wttool.com/Merchant2/merchant...Category_Code=

I also found a 1/2" drill chuck with key and #2 MT arbor for my Jet mini at this place for $6.00 !!! It works great. I bought the same chuck last year for my drill press and the quality seems pretty good.

Now thanks to Slip showing me the thru-drilling on the lathe I have not had a bad plug yet, thanks Slip!

Oh ya.. here is the link for the chuck:
http://wttool.com/Merchant2/merchant...ode=18500230p0

Chris

01-13-2004, 12:30 PM	#3
ChrisH Registered User iTrader: (0) Join Date: May 2003 Location: Buzzards Bay/Onset, MA Posts: 180	I just bought this ball 1" ball shaped burr...and it works real well. The cutting surface stays clean. I use it in a jig like the one Jigman has shown on the drill press. here is a link : http://wttool.com/Merchant2/merchant...Category_Code= I also found a 1/2" drill chuck with key and #2 MT arbor for my Jet mini at this place for $6.00 !!! It works great. I bought the same chuck last year for my drill press and the quality seems pretty good. Now thanks to Slip showing me the thru-drilling on the lathe I have not had a bad plug yet, thanks Slip! Oh ya.. here is the link for the chuck: http://wttool.com/Merchant2/merchant...ode=18500230p0 Chris Last edited by ChrisH; 01-13-2004 at 12:33 PM..