Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Van · 07-03-2004, 06:59 PM

If you mean the screw under the guide loop, that is tight. I checked it when the prob started.

Reel has only been used 4-5 trips. never been apart for sure.

striped gear?? where? The guide bar spins OK when I crank, the guide only gets stuck on the left side. Like i said it will go over if I push on it a bit to the right.

07-03-2004, 06:59 PM	#3
Van zoom iTrader: (0) Join Date: Apr 2002 Location: Quincy Posts: 4,145	If you mean the screw under the guide loop, that is tight. I checked it when the prob started. Reel has only been used 4-5 trips. never been apart for sure. striped gear?? where? The guide bar spins OK when I crank, the guide only gets stuck on the left side. Like i said it will go over if I push on it a bit to the right.
	~..~..~.. ><((((º> Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.