MJ got most of it.
First I fill the tank near full, leave some room for expansion then stabalize the fuel in the tank before running to fog...etc..
Before I fog, i spray engine tuner into the intake/carbs, it removes carbon build-up.
Remove the plugs and spray more fog inside the cylinders, put the plugs back on loose and leave the wires off. That way it wont start and will remind you to change the plugs in the spring, but put it together and run it to get all the fog oil out then change the plugs..
Change the fuel/water separator also. Run some of the non-toxic antifreeze through any pumps washdown, bait whatever. Pour the rest into the bilge in case there is any water left. I pour in through the cabin drain so that it goes throughout. Leave all drain plugs off.
That should do it.
Don't fear doing this yourself. Its not hard at all.
They'll help you out at the marine store.
|