Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Bernzy · 10-05-2004, 03:41 PM

Hi Bob,

I made one out of a large tupperware type storage container.
I cut a 4" hole in the center of the bottom and picked up a 4" plastic flanged fitting at a woodworking store. I gooped it in place with the flange inside, then bought the appropriately sized fitting for the shop vac hose. I used cheap furnace filters to catch the larger paint particles. A bit noisy but it worked quite well.

Bernzy

10-05-2004, 03:41 PM	#3
Bernzy Registered User iTrader: (0) Join Date: Jul 2002 Location: Indianapolis, IN Posts: 1,269	Hi Bob, I made one out of a large tupperware type storage container. I cut a 4" hole in the center of the bottom and picked up a 4" plastic flanged fitting at a woodworking store. I gooped it in place with the flange inside, then bought the appropriately sized fitting for the shop vac hose. I used cheap furnace filters to catch the larger paint particles. A bit noisy but it worked quite well. Bernzy
	"Sometimes you eat the bear and, well, sometimes... the bear, he eats you." _____________________ Support your S-B sponsors --------------------------------------