Quote:
Originally posted by Bernzy
Hi Bob,
I made one out of a large tupperware type storage container.
I cut a 4" hole in the center of the bottom and picked up a 4" plastic flanged fitting at a woodworking store. I gooped it in place with the flange inside, then bought the appropriately sized fitting for the shop vac hose. I used cheap furnace filters to catch the larger paint particles. A bit noisy but it worked quite well.
Bernzy
|
Correction: I used a 4" dryer vent hose from the back of the spray booth to a 4" to 2" reducer connected to the shop vac.
Also, several layers of furnace filter prevented any clogging of the shop vac filter.
Bernzy