Chef there are 2 dogs on that reel,one for the click/no click and one for the anti reverse.Follow the silver bar connected to the ant /rev switch to the black plastic end (its round with a little knob on it. The dog you want is lying on top of that. There will be 2 silver tabs coming off the brass dog gear ,they go on either side of the ratchet gear( round ,brass with a lot of teeth over the pinion gear in the center). Sometimes these tabs separate a little and don't grab the ratchet enough to pull the dog into it so it will stop the reverse action. If this is the case try squeezing them together so they will grab the ratchet gear.---this is the quick /lucky fix. If the dog or ratchet is chewed up, you need to replace them. Give it a look and if you get stuck,see me in the am. some day, and I make fix
