Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Canalman · 12-01-2004, 05:08 PM

Eben,

I have found that the 10 inch brad points still wander. Stick with the 6, another trick I use is, I dril from the rear of the plug using a 3/16 bit and fron the nose using a 1/8, gives you a bigger target if you wander slightly from the nose, and the 3/16 doesn't wander mach at all. Actually, I ground my 1/8 bit down to about 4 1/2" and I drill most of the way using the 3/16. Just my $0.02

-Dave

12-01-2004, 05:08 PM	#22
Canalman Calling Jon The Fisherman iTrader: (0) Join Date: Jan 2003 Location: The Sack Of Mass Posts: 2,357	Eben, I have found that the 10 inch brad points still wander. Stick with the 6, another trick I use is, I dril from the rear of the plug using a 3/16 bit and fron the nose using a 1/8, gives you a bigger target if you wander slightly from the nose, and the 3/16 doesn't wander mach at all. Actually, I ground my 1/8 bit down to about 4 1/2" and I drill most of the way using the 3/16. Just my $0.02 -Dave
	Surf Asylum Lures, Custom Lures for the "Committed" Official S-B Sponsor