Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Young Salt · 01-29-2005, 08:49 AM

i get them fully covered on the first coat...i find it alot easier to miss spots on the second coat because it's already glossy.

Once they are coated i check them about every 15 min. for the first hour or so to make sure i didn't miss any spots or have any spots that are sagging because of excess epoxy.

i wait a few days before touching them......instructions say 72 hours for hard cure at room temp.

01-29-2005, 08:49 AM	#2
Young Salt Salt of the Earth iTrader: (0) Join Date: Nov 2002 Location: Suburbia, RI Posts: 1,025	i get them fully covered on the first coat...i find it alot easier to miss spots on the second coat because it's already glossy. Once they are coated i check them about every 15 min. for the first hour or so to make sure i didn't miss any spots or have any spots that are sagging because of excess epoxy. i wait a few days before touching them......instructions say 72 hours for hard cure at room temp.