|
Here's how I'm fogging eyes....
I took some old scrap 1/8 fiberboard type stuff and cut out about 4 pieces that are 4 inches wide and maybe 8" long.
Then I took my different sized forstener bits and drilled a different sized hole a couple of inches in from the end of each one. To fog the eye you just pick a template witha hole a little biger than the eye, hold it next to the plug so that teh eye shows thru the hole, and spray away. The template catches most of the paint but the eye gets fogged nicely.
The other thing I have done is to use a circle template that I got at staples for a couple of bucks. Then I took a roll of duct tape and went over all the holes except for the one that is the size I needed.
|