I got sick of the round tubes in my bag always coming unglued and slipping around in the bag. I took two plano plastic boxs and cut the latch side off on the saw. I drilled a 1/4" holes in the bottom of the divisions for drainage and I epoxied a few 3/4" spacers between the hinged sides and slipped the asssembly into my bag. They fit tight, but they hold a dozen plugs with plenty of tin in the spaces created with the spacers between the boxs.. when the bag becomes jumbled because of dumping the gear inside, I simply yank the insert out and open the boxs to clean up the gear.
The only gripe I have with all the bags is that they are not deep enough to handle big wood!
