Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

thefishingfreak · 11-02-2005, 07:09 PM

i used fiberglass resin, mixed with the sawdust. came out a little dark but not bad. i knew it would do that

seeing the resin turns dark when you add the hardner..
shoulda used clear.. but clear that thick can crack. might try 5 minute epoxy next time with the sawdust mixed it?

whell here it is..
thats one coat of clear. gotta sand it tomorrow and add a few more to fill the grain..ohh and get rid of the unsightly flow indicator hangin off it's head.

[IMG]

[/IMG]

11-02-2005, 07:09 PM	#11
thefishingfreak "Fishbucket" iTrader: (1) Join Date: Feb 2004 Location: Bahston Hahbah Posts: 6,588	i used fiberglass resin, mixed with the sawdust. came out a little dark but not bad. i knew it would do that seeing the resin turns dark when you add the hardner.. shoulda used clear.. but clear that thick can crack. might try 5 minute epoxy next time with the sawdust mixed it? whell here it is.. thats one coat of clear. gotta sand it tomorrow and add a few more to fill the grain..ohh and get rid of the unsightly flow indicator hangin off it's head. [IMG][/IMG] Last edited by thefishingfreak; 02-05-2006 at 03:08 PM..
	Fishbucket_Sportfishing