Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Diggin Jiggin · 11-10-2005, 02:44 PM

How about using more but smaller weights that don't reach the thru wire, or melt the lead and pour it into the weight holes after the plug is wired.

I've run a thicker wire thru the plug, poured the lead and then extracted the wire (Leaving lead with holes for the wire to pass thru. Then paint it and wire it and the smaller diameter wire goes thru the holes from the larger wire pretty easily..

11-10-2005, 02:44 PM	#4
Diggin Jiggin Registered User iTrader: (0) Join Date: Nov 2004 Location: plymouth,ma Posts: 1,142	How about using more but smaller weights that don't reach the thru wire, or melt the lead and pour it into the weight holes after the plug is wired. I've run a thicker wire thru the plug, poured the lead and then extracted the wire (Leaving lead with holes for the wire to pass thru. Then paint it and wire it and the smaller diameter wire goes thru the holes from the larger wire pretty easily..