Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

castn4bass · 12-10-2005, 01:14 AM

when you have the shape of the body done & sanded, then you position the blank so its upright level , reposition the rear stock about an 1/8 inch .Then as it spin you remove stock from just one side giving you the inverted lookat that end. play around a little to figure it out , doesnt need a lot of movement.

12-10-2005, 01:14 AM	#4
castn4bass Plug Ho, Wannabe! iTrader: (0) Join Date: Jul 2002 Location: Wareham, MA Posts: 186	xactly when you have the shape of the body done & sanded, then you position the blank so its upright level , reposition the rear stock about an 1/8 inch .Then as it spin you remove stock from just one side giving you the inverted lookat that end. play around a little to figure it out , doesnt need a lot of movement.
	the most uncommon thing you can possess,.................. is.............. common sense!