Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Slipknot · 12-15-2005, 06:56 PM

A 1/2" Stebcenter will allow you to turn 3/4 x 3/4 stock no problem.
If the florring has relief cuts on the backside, you will have to rip then according to where the thicker parts are so you might only get 2 pieces per width for 2-1/4" wide flooring, but you already knew that.

12-15-2005, 06:56 PM	#4
Slipknot Super Moderator iTrader: (0) Join Date: Aug 2000 Location: Middleboro MA Posts: 17,125	A 1/2" Stebcenter will allow you to turn 3/4 x 3/4 stock no problem. If the florring has relief cuts on the backside, you will have to rip then according to where the thicker parts are so you might only get 2 pieces per width for 2-1/4" wide flooring, but you already knew that.
	The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely. 1984 was a warning, not a guidebook! It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.