|
Hi
Nice looking plugs, with your gliders I suggest a couple different weighting schemes. About an inch (or so) from nose and an inch (or so) from tail. If you want less of a glide go more than an inch. If you want the plug to do 180s go with less than an inch. Add more lead to the middle of the bait for more weight, this gives a little wider glide and more depth. And drill 2 holes in your lexan lip with scuffing the edge. When the epoxy cures the holes will act like a couple of screws and as you know the scuffing will give the epoxy something to grab. Check the pic for examples.
Hope this helps - fb
|