Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post - looking for hard maple 1.5" in width for jigs

Slipknot · 01-03-2006, 05:57 PM

Bill, when I need to make a jig for around the shop, usually scrap birch plywood will do, maybe a few scraps of hardwood if needed also.

There's nothing wrong with glueing up some thinner hard maple if you can't find it thick enough.

I have some old butcherblock somewhere if you really need some.

01-03-2006, 05:57 PM	#2
Slipknot Super Moderator iTrader: (0) Join Date: Aug 2000 Location: Middleboro MA Posts: 17,125	Bill, when I need to make a jig for around the shop, usually scrap birch plywood will do, maybe a few scraps of hardwood if needed also. There's nothing wrong with glueing up some thinner hard maple if you can't find it thick enough. I have some old butcherblock somewhere if you really need some.
	The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely. 1984 was a warning, not a guidebook! It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.