|
I've always battled with epoxy.. my basement is to cool to apply epoxy .. I epoxy them with mirror coat on the kitchen table.. I get set up with the plugs upstairs and my epoxy (unmixed) on the table.. crank the heat in the house about 74 ,,plus I put a space heater on the table..not blowing on the plugs but bouncing of the wall .. then i go away for about an hour... Plugs are not hot,, but the room is toasty.. Its been flowing and kicking pretty good so far .. I only do 6 plugs at a time ,, small batches .. I wear a powderless glove on one hand during and after paint so my oily fingers never touch the plug prior to epoxy ..I had durabilty issues with etex.. a little knick and i could peel it .. Not mirror coat ,
|