|
poplar
Flaptail,
Just my opinion...
I have poplar plugs that are 10 years old and beaten up good and they weigh the same as when I made them. If you use a sealer on poplar may I suggest straight TUNG oil. Soak it and let dry then buff with a light steel wool (this closes the pores good). FACT...It dries faster than linseed and penetrates better into tight grain woods. It is more expensive, but well worth it. Poplar as mentioned is just a bit denser than AYC, but it has it's applications depending on what you want your plug to do. For instance, I make Danny's out of poplar when I want to drive my plug down on the backside of a wave and let it rise slowly to the top (like a dieing fish). Cedar Danny's are like corks in the water, but this too can be desireable at times. The one thing about this hobby is that there are no rules. Experiment...you'll be surprised what you come up with. Good luck !
|