Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Nebe · 02-04-2006, 07:23 PM

http://www.leevalley.com/wood/page.a...&p=32065&cat=1

christian, if you do it, use superglue gell and make sure you clean the sideplate really well with isopropal alcohol Start with 2 or 3 1/4x1/10" mags.. you have to put them in opposing polarity order, North, south, north or south, north, south.... then glue 3 washers from lee valley where you want the magnets. Then just stick the magnets to the washers. If you feel there is too much, remove a magnet. if there is too little, add a magnet.

02-04-2006, 07:23 PM	#3
Nebe Registered User iTrader: (0) Join Date: Sep 2003 Location: Libtardia Posts: 21,692	http://www.leevalley.com/wood/page.a...&p=32065&cat=1 christian, if you do it, use superglue gell and make sure you clean the sideplate really well with isopropal alcohol Start with 2 or 3 1/4x1/10" mags.. you have to put them in opposing polarity order, North, south, north or south, north, south.... then glue 3 washers from lee valley where you want the magnets. Then just stick the magnets to the washers. If you feel there is too much, remove a magnet. if there is too little, add a magnet.